GG&G Aimpoint T-1 and H-1 QD Mount
Submitted 1 year 5 months ago by feeds user.
We Believe the Aimpoint Micro T-1 and H-1 scopes are great for tactical encounters--but they have a downside. The Aimpoint scope design does not accommodate lens covers; and you cannot purchase any that fit. The bikini lens covers included are usually lost in the first month, and they are not the easiest lens covers to remove, keep in place or reinstall. GG&G has a super solution, the Aimpoint Accucam Quick Detach T-1 and H-1 Mount With Integral Lens Covers which includes a built-in provision that provides for the installation of a flip-up lens cover for the ocular end and a specially prepared flip up lens cover that fits the objective lens. The Aimpoint QD T-1/H-1 Scope easily and solidly installs onto the lightweight GG&G Aimpoint Accucam Quick Detach T-1 and H-1 Mount with four 3mm screws. The installation wrench is included in the kit. Easily installed. Ergonomic design. The GG&G Accucam QD Locking Lever System provides you with a solid method to quickly install or remove the Aimpoint T-1 from the weapon. The scope can quickly be installed on a dovetail rail in seconds by rotating the Accucam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. The ergonomic finger loop of the lever is easily operated, even with a gloved hand, and the round design is virtually snag- proof. The patented Accucam QD design allows you to adjust the tension to accommodate out of spec or worn dovetails. Not recommended for .50 BMG or lightweight machine guns. The Aimpoint Mount includes a custom prepared lens cover for the objective lens and an integral lens cover for the ocular end of the scope. The Aimpoint T-1/H-1 scopes easily install onto the GG&G T-1 Mount with four 3mm screws. The installation wrench is included. Designed to mount directly to the AR-15/M16 upper receiver's dovetail. This location places the red dot just above the front sight post. The Aimpoint T-1 Mount is low enough to allow "Absolute True Co-Witnessing" with back up iron sights like the GG&G A2 BUIS and MAD BUIS. The T-1/H-1 Mount With Lens Covers is manufactured from solid billet 6061 T-6 aluminum. All aluminum parts are Type III hard coat anodized matte black per mil-spec. The Accucam Quick Detach mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec. All edges of the mount and QD mechanism have been softened and rounded for the shooters comfort and safety. Weight: 6.5 oz. Warranty: Lifetime. Made In America By Men And Women Proud To Be Americans!